Редуктор хода KYB MAG-18VP-230F-3 RB511-61290 для мини-экскаватора Kubota U25S U25-3 U25-3a U25-3S U25-3EU

1. Product Identification
Component: Complete Final Drive Assembly (Hydraulic Travel Motor with Planetary Gearbox Reducer)

Hydraulic Motor Model: KYB MAG-18VP-230F-3 (Kayaba MAG Series Architecture)

Kubota OEM Part Numbers: RB511-61290, RB559-61290, RG248-61290, RB511-78000 (RB51161290, RB55961290, RG24861290, RB51178000)

Machine Compatibility:

Kubota U25

Kubota U25S / U25-3S

Kubota U25-3 / U25-3a /U25-3EU

Condition: Brand New Original / Premium OEM Specification Equivalent

2. Technical Specifications
Motor Type: Two-Speed Swash Plate Axial Piston Motor

Reducer Type: Compact Heavy-Duty Multi-Stage Planetary Gearbox

Operating Parameters: Factory-calibrated flow rate, displacement, and pressure output matching Kubota 2.5-ton class zero-tail-swing travel circuits.

Integrated Controls: Features automatic two-speed shifting capability, dual main relief valves, counter-balance valves, and internal dynamic parking brakes.

Interface Mounting: 9-bolt or standard flange configuration designed to bolt directly onto the track frame chassis and accept original drive sprockets.

3. Critical Installation Requirements
Travel Motor Housing Priming (Mandatory)
Before running the excavator or driving the tracks, you must manually pre-fill the axial piston motor housing with clean hydraulic fluid through its highest case drain port. Running an axial piston motor bone-dry—even for a few track revolutions—will score the swash plate and piston slippers, causing instant pressure failure.

Verify Case Drain Line Pressure
Inspect the travel motor case drain line back to the hydraulic reservoir. Ensure there are no kinks, restrictions, or line collapses. High backpressure in the travel case drain line will immediately blow out the main hub oil seal and mix hydraulic fluid with gear oil in the gearbox.

Planetary Gearbox Lube Check
Ensure the gear reducer casing is filled to the designated level plug with high-grade gear oil (typically SAE 80W-90 or SAE 90) prior to operation. Drain and replace the break-in gear oil after the first 50 to 100 operating hours.

Hydraulic System Flushing
If replacing a failed final drive that generated internal metal shavings, flush the travel circuit lines, clean out the hydraulic tank, and replace return and pilot oil filters to prevent abrasive wear on the new motor components.

4. Frequently Asked Questions (FAQ)
Q: Are part numbers RB511-61290, RB559-61290, RG248-61290, and RB511-78000 fully interchangeable?
A: Yes. These part numbers reflect standard Kubota engineering updates, dash-model revisions (such as U25-3 vs. U25-3a), and kit configurations across the 2.5-ton mini excavator series. All utilize the core KYB MAG-18VP-230F-3 final drive platform with identical bolt patterns and sprocket fitments.

Q: My excavator tracks slowly or loses pushing power on one side. Is this a final drive issue?
A: Loss of tracking power or slow speed on one side can be caused by worn axial pistons inside the travel motor, internal gear wear in the reducer, or a worn swivel joint (center joint) seal. If hydraulic pressure testing at the motor ports shows proper input pressure but weak output torque, replacing the final drive assembly will resolve the issue.

Q: Does the unit come complete with both the hydraulic motor and gear reducer?
A: Yes. The KYB MAG-18VP-230F-3 assembly is supplied complete, fully integrated with the lower planetary gear reducer, upper axial piston motor, shift valve block, and main brake assembly.

5. Shipping & Logistics
Packaging: Treated with rust-inhibiting anti-corrosion oil, fitted with plastic port plugs, and secured inside an export-safe protective crate or reinforced box.

Transit Time: Global express air freight via DHL/FedEx/UPS typically delivers within 3 to 7 business days directly to your shop or job site.